roll bar steel tubing
"
ST52 BK أنبوب فولاذي دقيق مدلفن على البارد
Product Name: Small Diameter Seamless Cold Rolled Precision Steel Tube ST52 BK Cold Finished Material: ST35, ST45, ST52 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: BK, BKW, BKS, GBK, NBK Application: For high precision purpose, auto industry, like manipulator, Shock Absorber, Transmission Shaft, Steering Gear, Car Frame, etc. Cold Rolled on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Deliver condition:
40Cr / 41Cr4 / 5140 أنبوب فولاذي مدلفن على البارد أجزاء فولاذية غير ملحومة مدرفلة على البارد
40Cr / 41Cr4 / 5140 Auto Spare Parts Steel Tube Cold Rolled Seamless Steel Tubing Machined Steel Parts Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Product Name 40Cr / 41Cr4 / 5140 Seamless Cold Rolled Steel Tube for Automotive Parts Material 40Cr / 41Cr4 / 5140 Delivery Condition BK, BKW, BKS, GBK, NBK Standard DIN2391 / EN10305-1 / GB/T3639 Size Range OD:
40Cr / 41Cr4 / 5140 أنبوب فولاذي غير ملحوم مسحوب على البارد ، قطع غيار السيارات أنابيب فولاذية قابلة للحام
Product Name: 40Cr / 41Cr4 / 5140 Seamless Cold Rolled Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.
أنبوب فولاذي مدلفن على البارد لامتصاص الصدمات أنبوب فولاذي غير ملحوم دقيق 27 مم × 1 مم
Product Name: 27mm × 1mm Shock Absorber Cold Rolled Precision Seamless Steel TubeMaterial: ST35, ST45, ST52Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8mApplication: Shock Absorber, Hydraulic Cylinder, Gas Spring, Seat Lifter Pipe, Motor Casing Pipe, Seat Modulator Pipe, etc.Delivery Condition: 1. BK (+C) No heat treatment after last cold forming process.2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)3. BKS (+SR) After
أنابيب الصلب غير الملحومة المدرفلة على الساخن 30HGSA / 30CrMnSIA
Hot Rolled Seamless Steel Tubes 30HGSA/30CrMnSIA Hot Rolled Seamless Tubes 30ХГСА (30HGSA acc. to GOST 8731-1974 or GOST 32528-2013) GOST 32528-2013 Seamless cold-deformed steel pipes 30HGSA/30CrMnSiA hollow steel bars General for 30HGSA/30CrMnSiA hollow steel 30HGSA is a steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After oil quenching it will be through hardened up toØ60 mm bar diameter. The
GOST 8733 أنبوب فولاذي غير ملحوم مدلفن على البارد للإنشاءات العامة / الميكانيكية
GOST8733 Seamless Colled Rolled Steel Tube for General Structural and Mechanical Purpose Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified
JIS G3101 أنبوب فولاذي غير ملحوم مدلفن على البارد أنبوب هيكلي SS400 أنبوب فولاذي
Product Name: JIS G3101 Seamless Cold Rolled Structural Tube SS400 Steel Tube Material: SS330, SS400, SS540 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5. Heat Treatment:BKS, GBK, NBK 6. Straightening/Cutting to specified length/Finished Measuring Inspection 7.
أنبوب فولاذي مجلفن غير ملحوم مدلفن على البارد EN10305 - 4 E355 + N للأنظمة الهيدروليكية
1. Product Name: Galvanized Seamless Cold Rolled Steel Pipe EN10305-4 E355 +N for Hydraulic Systems 2. Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. +N(Normalized) Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability. 6. Electro Galvanizing Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and
أنبوب فولاذي مدلفن على البارد للغلاية ذات الضغط العالي مع سطح نظيف طراز SA192
Standard: SA192 Seamless Cold Rolled Steel Tube for High Pressure Boiler Application with Clean surface Application: For seamless carbon steel boiler and superheated tubes for high-pressure service Size(mm): O. D.: 6.0~114.0 W. T.: 1~15 L: Max 12000 Packing: 1. Standard export bundle wrapped with strong steel strip 2. Wooden case 3. Nylon packed Payment: T/T Delivery: With 45 days of order confirmation Your special requirement is highly welcomed and will be fulfilled. We
